Electronics

Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.

Handlebar computer mount for Garmin/Wahoo for Vuka Shift AXS

The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes

The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes

Bluetooth and ANT+ Heart Rate Sensor & Calorie Tracker Connect. Track. Share. The TICKR heart rate monitor accurately tracks your heart rate and calorie burn during any activity or workout. Its new design makes it the lightest and slimmest heart rate monitor on the market! Equipped with Bluetooth and ANT+ technology, TICKR offers an easy and reliable way to connect heart rate to your favorite training apps and fitness devices, and now supports up to three simultaneous Bluetooth connections. The new integrated heart rate sensor and strap design provide a more secure connection and fit, so your training can be optimized, measured, and shared. NEW! INTEGRATED CHEST STRAP DESIGN The integrated sensor and strap design of the TICKR provides a more secure connection and a more secure fit to prevent sliding and shifting while working out. NEW! SLIM, LIGHTWEIGHT HEART RATE SENSOR POD At 1.7oz (48g) and 12.01mm thick, the TICKR is the lightest and slimmest heart rate monitor and strap combination on the market, not to mention the most comfortable! NEW! MULTIPLE SIMULTANEOUS BLUETOOTH CONNECTIONS TICKR supports up to three simultaneous Bluetooth connections for a trouble-free start to your workout. NEW! TOP DISPLAY LED INDICATOR LIGHTS Two LED lights show visual confirmation of the TICKR connection status via Bluetooth and / or ANT+: searching for a connections (blue slow blinking light), connecting (blue fast blinking light), and reading heart rate (red blinking at current beats per minute). DUAL-BAND ANT+ AND BLUETOOTH TECHNOLOGY Both ANT+ and Bluetooth capabilities allow for a wireless connection to both smartphones and GPS devices at the same time or separately. REAL-TIME HEART RATE, CALORIE, AND WORKOUT DURATION TRACKING TICKR measures vital workout metrics, including heart rate, calorie burn, and workout duration in real-time with the Wahoo Fitness app. These metrics can also be sent to compatible third-party apps that track these metrics. FRONT SENSOR & STRAP CONNECTION The front connection on the TICKR sensor and strap allows you to gear up and go quickly. You don’t have to fumble through side placements of snaps and hooks. COIN CELL BATTERY Includes a coin cell battery that can last for over 500 hours of workouts. ADVANCED PERFORMANCE MATERIAL STRAP Made from advanced performance materials, the TICKR strap is designed to fit comfortably chest, yet stay securely in place during intense activity. APPLE WATCH AND APPLE TV INTEGRATION Connect directly via Bluetooth to your Apple Watch or Apple TV as another option for gathering heart rate data while you workout. THIRD PARTY APP COMPATIBILITY Works seamlessly with over 50 apps - including Zwift, The Sufferfest, Peloton for cycling and Runkeeper and MapMyRun for running. TECH SPECS - Dimensions (LxWxH): 2.5" L x 0.2" W x 1.5" H (6.3cm L x 1cm W X 3cm H) - Weight: 1.7 oz (48 g) with strap - Battery: Coin Cell (CR2032) - Battery Life: Over 500 active hours - Sweatproof: Yes (Handwashable Strap) - Water Rating: IPX7 (Waterproof up to 5 ft.) - Strap Length: Adjustable from 23" to 48" IN THE BOX - TICKR heart rate pod - Adjustable soft strap - CR 2032 Battery (installed) - Quick Start Guide - Important Product Info Guide

An innovative cycle computer/action camera center mount, specifically designed for integrated stem/handlebar systems. Various mounting positions for Garmin Edge/Wahoo/Sigma GPS cycle computers and GoPro/Shimano sport cameras, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800 BT, and other GoPro-mount-compatible devices. - Compatible Devices: Garmin Edge / Wahoo / Sigma GPS bike computer / GoPro action cams and other devices with GoPro mount - Handlebar Compatibility: Shimano Pro Stealth, FSA Plasma, Ritchey WCS Solostream, SCOTT SYNCROS RR1.0 Carbon Aero 420, Most Talon, Canyon H31 & CP series - Material: aluminum / fiberglass composite - Max load: 220g - Weight: 40g (120mm) / 45g (150mm) - Dimensions: 12 x 3.5 x 3cm (120mm) / 15 x 3.5 x 3cm (150mm)

SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. It works great with computers that use a 1/4-turn twist lock interface.

SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. SRAM's QuickView Computer Mount also features a center-offset design so the computer (sold separately) can be placed directly in front of the stem, or flip it to position the computer behind the bar for MTB or cyclocross use. It works great with computers that use a 1/4-turn twist lock interface.

SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap

This mount integrates with your Quick-Release Aerobars by attaching directly to one of the aerobar handlebar clamps and provides and out-front section of bar for attaching computers or other accessories. Benefits: - Positions your computer for easy viewing in road or aero riding positions - Stays attached to your bicycle when aerobars are removed Details: - Provides two mounting heights and 3 positions to fine tune your computer's position - Integrates with the optional Water Bottle Mount, putting all your essentials at your fingertips - Includes all necessary mounting hardware

The Protege Series are great for training, touring, or keeping track of car-free miles. - Four-line, easy-to-read macromonitor LCD display provides up to five pieces of data at a glance - Heavy-duty, oversized wire harness and ultrasonically welded case ensure a durable, weatherproof unit - Mode changing is easy: push the computer forward in the spring loaded bracket- the computer is the button - Auto start/stop and LCD shut off - Fits 25.0-31.8mm handlebars - Weight: 57 grams with bracket and sensor - Case size: 40mm x 47mm - Height (w/ bracket): 27 mm

- Contains universal handlebar/stem compatible bracket, sensor and magnet - Compatible with Protege 9.0 wireless computer - Will not convert standard Protege 9.0 to wireless

The Protege Series are great for training, touring, or keeping track of car-free miles. - Four-line, easy-to-read macromonitor LCD display provides up to five pieces of data at a glance - Heavy-duty, oversized wire harness and ultrasonically welded case ensure a durable, weatherproof unit - Mode changing is easy: push the computer forward in the spring loaded bracket- the computer is the button - Auto start/stop and LCD shut off - Fits 25.0-31.8mm handlebars - Weight: 57 grams with bracket and sensor - Case size: 40mm x 47mm - Height (w/ bracket): 27 mm

The Protege Series are great for training, touring, or keeping track of car-free miles. - Four-line, easy-to-read macromonitor LCD display provides up to five pieces of data at a glance - Heavy-duty, oversized wire harness and ultrasonically welded case ensure a durable, weatherproof unit - Mode changing is easy: push the computer forward in the spring loaded bracket- the computer is the button - Auto start/stop and LCD shut off - Fits 25.0-31.8mm handlebars - Weight: 57 grams with bracket and sensor - Case size: 40mm x 47mm - Height (w/ bracket): 27 mm

- Discreet way to install an Apple AirTag inside your tubeless tire - Identify the location of a stolen bike, enabling the owner to alert local authorities for retrieval - AirTag is housed in a 3-part silicone and rubber tubeless valve mount - Sacrificial stem, ensures tracker and rim protection under impact - Silicone top cover protects tracker and internal plug reduces sealant ingress - Supplied with 3 pairs of our rubber valve bases to suit different rim profiles for the optimum seal Note the Tubeless Secure Tag Holder can only be used in rear wheels – not for use on the front wheel Compatible tire types: - MTB tyres (XC, Enduro Trail, Downhill) - Gravel Tires (the narrowest recommended tyre size is 38mm wide)

The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The fixed version is recommended for zero degree or negative degree stem angles. Can also be used with positive degree stems if additional spacers added (5mm to 10mm) above the stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer. - Compatibly – 1-1/8" Steerer tube Diameter, Thickness (@ Steerer) – 5mm, Length (Center-to-Center) – 50mm, - Recommended for 0 Degree to Negative Degree Stem Angles - Supported Computers – Garmin Edge 20, 25, 200, 500, 510, 520, 800, 810, and Forerunner 310XT - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820). - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface - Compatibility: All Garmin Edge® Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.) - Made in Boise, Idaho, USA. - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

The K-EDGE Gravity Cap is a great computer mount option for those riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek computer mount. The Gravity Cap replaces your existing top cap and is ideal for Downhill, Enduro, Gravel, Touring, etc. - CNC Machined 6061-T6 Aluminum - Injection Molded Copolymer Interface - Compatibility: Wahoo ELEMNT - Lifetime Warranty - Weight: 18g - Anodized Colors: Black

K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility: Wahoo Bolt - Fits Handlebars: 31.8MM - NOT GoPro Interface Compatible - Anodized Color: Black Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.

The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The adjustable version allows for a variety of different stem angles. Can be used with positive or negative degree stems and additional spacers can be added (5mm to 10mm) above the stem. Note that some of the larger computers will not always work with a steep angled stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer.

An excellent choice for mountain, cross, and road cyclists who prefer to have the computer above the stem. The mount replaces a standard 5mm spacer and is locked securely in place by the top cap compression system. - Supported Computers – Wahoo ELEMNT, Wahoo Bolt, Wahoo MINI - Compatible – 1-1/8" Steerer tube Diameter, - Thickness: 5mm, Length 50mm (Center-to-Center) - Recommended for 0 Degree to Negative Degree Stem Angles - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Weight: 25g - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded

GNT Axact 9/11 Mounting Kit Product description - Includes sensors, mounting bracket, shims, magnet, and zip ties

• Handlebar computer/GPS mount designed for use with Contact SLR Aero integrated handlebars (sold separately) • Mounts to underside of handlebars • Integrated Di2 front junction box mount for clean cable routing

GNT Axact 9W/13W Wireless Mount Kit w/ Speed Sensor & Magnet Product description - Kit includes mount, sensor and magnet

GNT Axact Wireless Speed Transmitter Product description - Includes wireless sensor and zip ties

GNT Axact 13W Mounting Kit Product description - Includes sensors, mounting bracket, shims, magnet, and zip ties

GNT Axact 14W Wireless Speed Sensor Product description - Replacement wireless speed sensor for Axact 14W computers

- Designed for Giant Dash L200 - Compatible with round handlebars - 31.8mm - Includes Giant and Wahoo computer trays - Length adjustable for extra space between computer and stem. - Compatible with Giant Light & Camera Mount

- Designed for Giant Dash M200 - Compatible with round tube handlebars (Ø31.8mm) - Includes Giant and Wahoo computer trays - Length adjustable for extra space between computer and stem. - Compatible with Giant Light & Camera Mount.

Giant's Axact 6 is a simple way to get the most out of your rides. It tracks six essential functions, including distance and speed on a large, easy-to-read display. The wired sensor and handlebar mount attach easily to your bike, and a simple low battery indicator lets you know when its time to open the easy coin-release cap to change it.